Siemens 810T manual Operating Sequences, Preliminary remarks

01.93	3 Operating Sequences
	3.0 Preliminary remarks

3 Operating Sequences

3.0Preliminary remarks

In the previous Sections, the functions of the individual operating elements were described in detail.

This Section shows how to use the operating elements in frequently occurring operating sequences.

It explains:

Which operating elements are used?

... and in which order?

The Section is divided into two parts:

·In the first part (preparation) operating methods are explained that you use before, during or after program input or that you use only once before you start the control operation.

·In the second part (operating) the operating methods are explained that occur during processing.

·In the following subsections, the part of the illustrations shaded grey show the function of the dual function keys required.

·In screen forms without an extension (>), the S value for the leading spindle is displayed under S.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-1

SINUMERIK 810T, GA3 (BN)