Siemens 810T manual Sequence of operation, 129

11.90 3 Operating Sequences

3.2.11 ºActual value settingº mode (ºPRESETº)

Sequence of operation

or

Operate the operating mode selection key in the integrated machine control panel, and

then the ºPRESETº softkey or ...

and

... set the operating mode selector switch on the external machine control panel to this symbol.

This input form with the input field marked in inverse video appears.

(( 810T))

(( Bild 8 von Druckerei einmontieren

1. ºPRESET offsetº without inclusive calculation of the tool offset

0

S

STORE

7	=
X	H

Using the keyboard, enter number º0º into the ºoffset numberº input field, and store it using the input key.

First enter the designation of the desired axis - in this example ºXº for the X axis. Then assign this axis the corresponding value of the ºPRESET offsetº using the numerical keys and finally operate the ºSTOREº softkey.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-129

SINUMERIK 810T, GA3 (BN)