Siemens manual 810T Bild 13 von Druckerei einmontieren

01.93 3 Operating Sequences

3.2.2 ºAUTOMATICº operating mode - selection of the ºCURRENT VALUESº or ºCURRENT BLOCKº display

(( 810T))

(( Bild 13 von Druckerei einmontieren

It is not possible to modify the data displayed on the CRT.

However, the 4 relevant new softkey functions are displayed.

The auxiliary functions are no longer displayed.

The speed values for the second spindle (if used) are now also displayed along with the extension of the position display to 7 axes.

You can return to the previous display.

Explanation of the ºCURRENT VALUESº display (basic display)

% 88
N5 L0 P0 N0
......................
Set value		Actual value
S1		S1	...........
F	M	F
		S1	...100%
		F...	100%

Aux. Function

M=3 M1=8 M2=9

D81 T5 H100

Actual pos. Distance to go

X	X
Z	Z
Q1	Q1
Q2	Q2
Q3	Q3

Display of the selected program (Program pointer)

Operating pointer, with information on the block number (ºN5º) and the subroutine number L..., pass count P...

and the block number within the subroutine with up to four levels of nesting.

Programmed and actual values of spindle speed (leading spindle) and feedrate (the characters after the feedrate value:

ºRº= feed per revolution, ºMº= linear feedrate), "U"

=revolutional feedrate G98). Spindle speed override and feedrate override in %

M function ( M3, M1, M2) Tool offset number (ºD81º) Tool number (ºT5º)

and further auxiliary/miscellaneous functions.

Actual position and distance-to-go value of the axes.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-91

SINUMERIK 810T, GA3 (BN)