Siemens 810T manual Example

2 Operation 11.90

2.3.5 Branching to operating functions within an operating mode

2.3.5.1Example for the selection of operating functions and branching to other menus

To select and branch to other menus, you simply use the 5 softkeys (2.1.1.1) under the CRT.

Example:

(( 810T))

(( Bild 3 von Druckerei einmontieren

((Foto - Nr. 810T/11 einmontieren))

((Foto - Nr. 810T/12 einmontieren))

Basic CRT display with the selected operating mode, e.g. ºAUTOMATICº.

A menu of 5 selectable operating functions is shown.

You wish, for example, to select the ºPART PROGRAMº function : Operate the appropriate softkey !

The ºPART PROGRAMº func- tion in ºAUTOMATICº mode is shown on the CRT display. Another menu of 5 more selectable functions is shown.

You wish, for example, to select the ºEDITº function:

Operate the appropriate softkey !

The function selected (ºEDITº) in the ºPART PROGRAMº menu in ºAUTOMATICº mode is shown on the CRT display.

The menu shows a branch to 3 new functions.

etc.

2-44 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)