Siemens 810T manual Now enter the value for the coarse offset ºG54º for, Input key

09.91 3 Operating Sequences

3.1.5 Zero offset

...

		Now enter the value for the coarse offset ºG54º for
...		the X axis into the input line, using the numerical
	· · ·	keys; then transfer the value into the input field with
		the input key.

The inverse marking now jumps to the next input field (ºcoarse offsetº for the Z axis).

Now enter the coarse offset for the Z axis, using the numerical keys. Then transfer this value into the input field with the input key.

The inverse video now jumps to the next input field (ºcoarse offsetº for the Q1 or 3rd axis).

or

... ...

· · ·

Operate this cursor key until the inverse marking has jumped into the right-hand input field (ZERO OFFSET ADD.)

Now enter the value for the fine offset ºG54º for the X axis into the input line, using the numerical keys; then transfer the value in the input field with the input key.

The inverse marking now jumps to the next input field (fine offset for the Z axis).

Now continue - as described for the preceding input - until you have entered all values for the ªFine offset º for G54 as well.

Select the other settable zero offset G55 to G57 using the appropriate softkeys in the menu and proceed as for G54.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-19

SINUMERIK 810T, GA3 (BN)