Siemens manual Sequence of operation for ºR PARAMETERº setting data, Bild 810T/22 einmontieren

3 Operating Sequences 09.91

3.1.6 Setting data: ºR PARAMETERSº, ºSPINDLEº, ºAXIALº, ºANGLE OF ROTATIONº, ºSCALE MODIFICAT.

Sequence of operation for ºR PARAMETERº setting data

SETTING

DATA

Operate the ºSETTING DATAº softkey in any of the operating modes.

RPARA-

METER

Operate the ºR PARAMETERSº softkey.

This input screen form appears with the input field marked in inverse video.

((Bild 810T/22 einmontieren))

1 ... n

Using the ºchannel switchoverº key, select either channel ºCH1º or ºCH3º (marked in inverse video in the upper right hand corner of the display).

Now operate any of the cursor keys to position the cursor to the desired input field of the displayed R parameters.

3-26 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)