Siemens 810T manual L2 Geometry Diameter/radius, L1 Wear L2 Wear Diameter/radius

3 Operating Sequences 01.93

3.1.4 Tool offset

2L1

3L2 Geometry

4Diameter/radius

Geometry values of the available tool types:

Under points P = º2º and P = º3º, you enter the geometry values of the turning tools into the input field

Under point P = º4º you enter the value of the cutter radius.

1. Turning tool	2. Grooving tool
Facing tool	(left tip)

L1	L1
L2	L2

The input of tool geometry values can be inhibited with

a key switch.

5 L1 Wear

6 L2 Wear

7Diameter/radius

Under points P = º5º to P = º 7º, you can (not obligatory) enter the wear data of the tools into the input form.

The machine tool manufacturer can set the maximum wear input to ± 0.999 mm.

The input of tool wear data can be inhibited by means of a key switch!

3-6 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)