Siemens 810T manual Editing and input keys, Delete input / operator message, Delete word / block

2 Operation 11.90

2.1.1 SINUMERIK 810T operator interface with integrated machine control panel

2.1.1.4 Editing and input keys

View of editing and input

Delete input / operator message

With this key you delete:

·Characters on the input line (see Section 2.1.1.1)

±with single operation:

always the last / most extreme right character

±with continuous operation:

all characters consecutively, from right to left, until the input line is clear.

·Characters on the operator message line (see Section 2.1.1.1)

±with single operation:

all characters simultaneously.

Delete word / block

With this key you delete from the part program memory

·The word on the CRT display to the right of the cursor (see Section 2.1.1.5), when the same address is shown on the input line (see Section 2.1.1.1)

·The block on the CRT display to the right of the cursor, when the same block number is shown on the input line.

Modify word

With this key you modify the word on the CRT display to the right of the cursor in the part program memory (see Section 2.1.1.5):

The word marked with the cursor is modified to the word with the same address that is shown on the input line (see Section 2.1.1.1).

Input character / word

You conclude your inputs with this key:

·The characters shown on the input line (see Section 2.1.1.1) are transferred into the screen list, the input fields where the cursor (see Section 2.1.1.5) is positioned.

·A word shown on the input line is transferred into the part program memory.

2-10 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)