Siemens 810T manual +X +Q ± Z +Z ± Q ±, Store

3 Operating Sequences 09.91

3.2.6 ªPLAYBACKº

+X +Q

± Z+Z

± Q ± X

...

M

STORE

7

X

Using the direction keys, traverse to the desired position.

Using the numerical keyboard, enter a block no. ºN ...º, and store it with the input key.

Enter the axis assignment ºXº using the keyboard, and then operate the ºSTOREº softkey.

The control transfers the X axis value under ºActual positionº into the selected block ºN ...º.

STORE

9

Z

Enter the axis assignment ºZº using the keyboard, and then operate the ºSTOREº softkey.

The control transfers the Z axis value under ºActual positionº into the selected block ºN ...º.

1

F

+

LF

...

Using the numerical keyboard, enter the required technology values, e.g. feedrate ºF...º etc., and terminate each input including ºLFº (block end) with the input key.

Note:

You cannot work with operator ºGUIDINGº.

3-118 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)