Siemens 810T manual DRF YES no, Drf, Select the ºDRFº softkey function, 127

09.91 3 Operating Sequences

3.2.10 ªDRFº

DRF

YES - NO

Operate the ºDRF YES - NOº softkey:

You activate the DRF offset by switching from ºNOº to ºYESº.

The ºDRF-handwheelº enable (º YESº) is displayed on the CRT.

DRF

Select the ºDRFº softkey function.

(( 810T))

(( Bild 53 von Druckerei einmontieren

This display appears on the CRT.

The screen display shows you the axis-handwheel assignment which you have set via the axial setting data (see also Section 3.2.9 ªHANDWHEELº).

DRF offset with connected handwheels:

Enter the axis name (e.g. ªXº) and press the ªENABLEº softkey. The ªENABLEº display changes from ªNOº to ªYESº. Now handwheel No. 1 applies to axis ªXº. When you operate the handwheel, you can effect a DRF offset, for the ªXº axis in the example.

The value of the DRF offset is displayed on the screen. Proceed in an analogous manner for the other axes.

If one handwheel is assigned to several axes by the axial setting data, the enable always appli- es to the last axis to have been input. On the display, the enable for the other axes automati- cally changes to ªNOº, i.e. the axis is blocked for the handwheel.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-127

SINUMERIK 810T, GA3 (BN)