Siemens 810T manual 4 ºResetº with change of operating mode, Examples

2 Operation 11.90

2.3.4 ºResetº with change of operating mode

2.3.4ºResetº with change of operating mode

·When changing from one selected operating mode to another (see Handling, Section

2.3.3.1and / or Section 2.3.3.2), a º RESETº can be generated by the control.

·The ºRESETº generated by the control when changing has the same effect as if the ºRESETº key had been operated (Section 2.1.1.6 or 2.1.2.1).

·The generation of a ºRESETº depends on the modes switched.

	PRESET	MDI AUTO	JOG	REPOS	AUTO-	INC	REF-
		MATIC			MATIC	...	POINT
PRESET		+	+	+	+	+	+
MDI AUTO-	+		+	+	+	+	+
MATIC
JOG	+	+		o	o	o	+
REPOS	+	+	o		o	o	+
AUTO-	+	+	o	o		o	+
MATIC
INC	+	+	o	o	o		+
...
REF-	+	+	+	+	+	+

Generation of ºRESETº with change of operating mode (+... Reset, o... No Reset)

Examples:

1)When changing from ºAUTOMATICº to ºJOGº mode, no ºRESETº is generated by the control!

2)When changing from ºJOGº to ºREFPOINTº mode, a ºRESETº is generated by the control!

2-42 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)