Siemens 810T manual Enter the desired program no. º%12º, Guiding Block Number

11.90

((Bild 810T/11 einmontieren))

3 Operating Sequences

3.1.10 Program input

This display appears on the CRT. The control shows you the last part program called, in the example program no. º%88º.

EDIT

Operate the ºEDITº softkey.

	1	2
%	F	D
SELECT
PROGRAM

Enter the desired program no. º%12º.

GUIDING

BLOCK NUMBER

Using the ºSELECT PROGRAMº softkey call the desired program.

Operate the ºGUIDINGº softkey.

Operate the ºBLOCK NUMBERº softkey. The block number ºN0005º is displayed.

Note:

The block numbers are generated by the control in steps of 5, i.e. after each LF (end of block) the block number is incremented by º5º.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-47

SINUMERIK 810T, GA3 (BN)