Siemens 810T manual 3081, 3082, 3083, 3084, 3087, 3200

4 Monitoring Functions	01.93
4.6 Listing of the alarms/alarm description

Alarm No.	3081
Alarm Text:	ºCRC not selected for approachº
Remedy:	CRC must have been selected before approach
Alarm No.	3082
Alarm Text:	ºFeed missing/not prog.º
Explanation:	1. During simulation of a part program
	± No feed F programmed
	± F value too small (MD).
	2. A feed type other than G98 has been programmed in a program
	section with G36.
Remedy:	Program feed correctly.
Alarm No.	3083
Alarm Text:	ºFeed limit fictitious axisº
Explanation:	So that the rotary axis does not travel faster in the TRANSMIT function
	that defined in MD 280*, the feed is reduced for individual blocks, if
	necessary.
	The alarm does not occur during rapid traverse in the part program
	(G00, G10).
Remedy:	Use feed override.
Alarm No.	3084
Alarm Text:	ºWrong data in DB 39º
Explanation:	± R parameter No. not in the permissible area
	± Assignment of axis to cam parameter wrong.
Remedy:	Correct DB 39 values and perform value transfer.
Alarm No.	3087
Alarm Text:	ºTransformation data errorº
Explanation:	Incorrect content in the transformation MD.
	The alarm applies to an individual block. The number of the incorrect
	machine data (MD) is specified in the block number.
Alarm No.	3200
Alarm Text:	ºIllegal working area limitationº
Reason:	Values were entered in the setting data (300*, 304*) which lie outside
	the traverse range.
Remarks:	The control enters the permissible maximum or minimum value in the
	setting data.

4-32 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)