Siemens 810T manual Data Interfaces, Setting data for description of the interfaces

09.91 6 Data Interfaces

6.1 General

6 Data Interfaces

6.1General

There are 2 universal interfaces (RS232C (V.24) / 20 mA) available for data transfer:

·Interface 1, on the front of the control, is variable with regard to the connection possibilities of different devices.

·Interface 2, on the back of the control, is normally used for the connection of a particular device with fixed assignment.

The second RS232C (V.24) interface, is only present

when option ºC62º is ordered.

The interface data (interface ºcharacteristicsº) are separately adjustable via ºSetting dataº (SD).

6.2Setting data for description of the interfaces

On the SINUMERIK 810T, the interfaces are described using setting data (SD). Both the interfaces º1º and º2º can be defined singly:

±Interface 1 : SD no. 5010 to 5017 and 5026 to 5029

±Interface 2 : SD no. 5018 to 5029

The EIA Code for special characters is the same for both interfaces (SD numbers 5026 to 5029).

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 6-1

SINUMERIK 810T, GA3 (BN)