Siemens manual 810T Bild 24von Druckerei einmontieren, Bild 810T/25 einmontieren, DRF Assignm

3 Operating Sequences 09.91

3.1.6 Setting data: ºR PARAMETERSº, ºSPINDLEº, ºAXIALº, ºANGLE OF ROTATIONº, ºSCALE MODIFICAT.º

This input screen form appears with the input field marked in

inverse video.

(( 810T))

(( Bild 24von Druckerei einmontieren

Use the cursor keys to position the inverse marking on the required input field and change the minimum and maximum working area limitation for the defined axes (for the fictitious axes of the TRANSMIT function, too).

			Enter the value for the selected input field with the
...	...		numerical keys.
		· · ·	Subsequently, you can transfer the value into the
			input field with the input key.
DRF
ASSIGNM			Operate the ºDRF ASSIGNMº softkey.

This input screen form appears with the input field marked in

inverse video.

((Bild 810T/25 einmontieren))

You can assign each of up to seven axes (for the TRANSMIT function) to a handwheel.

3-30 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)