Siemens 810T manual · ºModalº · º Jog operationº, 123

01.93 3 Operating Sequences

3.2.8 ºIncrementalº mode (ºINC FEED 1 ... INC FEED 10 000º)

Sequence of operation

INC ...

Operate the operating mode selection key on the integrated machine control panel and then any of the ºINC 1º to º INC 10 000º softkeys or...

or

	100
10	1 000
1	10 000

+X +Q

... set the operating mode selector switch, on the external machine control panel, to the setting

º 1 º, º 10 º, º 100 º, º 1000 ºor º 10 000 º

(º10º in example).

By operating any direction key, you traverse the corresponding axis.

± Z

+Z

± Q ± X

The red ºFeed holdº LED display must not be bright during the sequence of operation.

Notes:

The direction keys can perform in two different ways:

·ºModalº

·º Jog operationº

When ºModalº the axis is always traversed by one increment, in accordance with the setting (1, 10, 100, 1000, 10 000 increments), when the key is pressed (irrespective of whether the key is pressed for a short or long time).

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-123

SINUMERIK 810T, GA3 (BN)