3 Operating Sequences 09.91
3.1.3 Tools
3.1.3 Tools
The tooling should be carried out following the instructions of the
machine tool manufacturer!
3.1.4 Tool offset
3.1.4.1 Input of tool offset
The input display will help you to input ”Tool offset”.
You can call up this display with
the softkey in all operating modes.
TOOL
OFFSET
This input screen form appears.
((Bild 810T/15 einmontieren))
Explanation of the input screen form
D 5
Name of the tool offset memory ( ”D5” in this example).
The SINUMERIK 810T has 99 offset memories.
You can therefore address the tool offset numbers
D1 ... D99, and store offset data under each one.
3-4 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02
SINUMERIK 810T, GA3 (BN)