Siemens 810T manual 104, 108

01.93	4 Monitoring Functions
4.6	Listing of the alarms/alarm description

Alarm No.	36
Alarm Text:	ºBTR aborted by the computerº
Reason:	Part program received from BTR partner with error.
Remedy:	Restart.
Alarm No.	40
Alarm Text:	ºWrong data in MD 576*º
Remarks:	Alarm occurs on installation only
Alarm No.	41
Alarm Text:	ºError in absolute submoduleº
Reason:	Error when using a SIPOS absolute endcoder module.
Explanation:	The precise type of error is shown in the ªstatus of absolute moduleº
	line in the ªaxis service dataº display. The error number is displayed.
	You can look up the meaning of the error number in the documentation
	for the SIPOS absolute encoder module.
Alarm No.	44
Alarm Text:	ºPart program memory not availableº
Remarks:	Alarm only on commissioning
Alarm No.	48
Alarm Text:	ºPLC alarm texts from UMS illegalº
Remarks:	Alarm only on commissioning
Alarm No.	87
Alarm Text:	ºIllegal software limit switchº
Remarks:	Alarm only on commissioning
Alarm No.	104 *
Alarm Text:	ºDAC limitº
Remarks:	Alarm only on commissioning
Alarm No.	108*
Alarm Text:	ºOverflow of actual valueº
Remarks:	Alarm only on commissioning

_______

º*º stands for : º0º = axis 1, º1º = axis 2, º2º = axis 3, º3º = axis 4, º4º = axis 5

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02	4-11
SINUMERIK 810T, GA3 (BN)