Siemens Data input, 810T Bild 37 von Druckerei einmontieren, INC 1 .... INC 10 000 / Refpoint

3 Operating Sequences 11.90

3.1.15 Data input/data output

3.1.15.2 Data input

Sequence of operation

DATA

IN-OUT

Operate the ºDATA IN-OUTº softkey in any of the operation modes:

PRESET / JOG / AUTOMATIC /

INC 1 .... INC 10 000 / REFPOINT

(( 810T))

(( Bild 37 von Druckerei einmontieren

This input form is shown, with the input field for ºInterface for data inº marked in inverse video.

1

F

or

2

D

Now enter:

º1º ( for input into interface 1 ) or º2º ( for input into interface 2 ) and store it with the input key.

DATA-IN

START

Select the softkey function ºDATA-IN STARTº

By doing this you enable the control©s receive function.

On the upper right-hand side of the CRT the message DIO (Data input/output) is displayed.

On the Data type: line the data coming from the transmission device (tape reader, programmer ...) is identified.

The following table explains the types of data that can be loaded into the 810T:

3-80 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)