Siemens 810T manual 2072, 2073, 2074, 2075, 2076, 2077

4 Monitoring Functions	11.90
4.6 Listing of the alarms/alarm description

Alarm No.	2072
Alarm Text:	ºIncorrect input valueº
Reason:	The input value for the contour path calculation cannot be calculated.
Effect:	The faulty block is not simulated or executed.
Remedy:	Input the correct value for the contour path
Alarm No.	2073
Alarm Text:	ºNo intersection pointº
Reason:	Calculation of the contour path gives no intersection point with the
	values programmed.
Effect:	As for alarm 2072
Remedy:	As for alarm 2072
Alarm No.	2074
Alarm Text:	ºIncorrect angle valueº
Reason:	± An angle greater than or equal to 360 degrees was programmed
	±	The angle value has no meaning for the described contour
Effect:	As for alarm 2072
Remedy:	As for alarm 2072
Alarm No.	2075
Alarm Text:	ºIncorrect radius valueº
Reason:	± Radius value too large
	±	Radius value not allowed for the described contour
Effect:	As for alarm 2072
Remedy:	As for alarm 2072
Alarm No.	2076
Alarm Text:	ºIncorrect G02 / G03º
Reason:	Direction of circle for the described contour is not possible
Effect:	As for alarm 2072
Remedy:	As for alarm 2072
Alarm No.	2077
Alarm Text:	ºIncorrect block sequenceº
Reason:	Several blocks are needed for the calculation of the contour path:
	±	Block sequence not correct
	±	Insufficient information (underdefined)
Effect:	As for alarm 2072
Remedy:	As for alarm 2072

4-20 © Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02

SINUMERIK 810T, GA3 (BN)