Siemens manual Flexible plane selection, Bild 810T/57 einmontieren, Part PROG. Edit, Plane

09.91 3 Operating Sequences

3.1.7 Flexible plane selection

3.1.7 Flexible plane selection

Sequence of operation

and

PART

PROG. EDIT

Call one of the following modes:

·PRESET

·JOG

·AUTOMATIC

·INC 1 ... INC 10 000

·REFPOINT.

PLANE

Now press the softkeys ª PART PROGRAMº, ªEDITº and ªPlaneº one after the other.

This screen form appears on the screen with the input field marked inverse.

((Bild 810T/57 einmontieren))

...

...

Using the numeric keypad enter the channel No. of the channel via which the part program is to be executed (Channel 1 to 3).

If you wish to select one of the predefined planes G17, G18 or G19, press the appropriate softkey.

The control then automatically enters the designations for the abscissa, ordinate and applicate and the two interpolation parameters. All designations must have been defined by the machine manufacturer in the appropriate NC MD 548*, 550*, 552* and 304*.

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 3-33

SINUMERIK 810T, GA3 (BN)