Siemens 810T manual Control keys, Cursor left / right movement Cursor up/down movement

11.90 2 Operation

2.1.1 SINUMERIK 810T operator interface with integrated machine control panel

2.1.1.5 Control keys

1...n

View of the control keys

Cursor left / right movement

Cursor up/down movement

With these keys you move the cursor on the CRT.

SINUMERIK 810T differentiates between:

·Cursor for marking a word / block within displayed part programs

Cursor appearance / format:

·Cursor for marking an input field within displayed input forms / dimensioned graphics

Cursor appearance / format: or

(Cursor length depends on the max. permitted number of characters of the marked field)

Cursor movement in a part program

With this key you move the cursor :

·from word to word, to the left

·to the end of the previous block (after the last word / in front of LF), when the cursor is positioned before the start of the block.

With this key you move the cursor :

·from word to word, to the right

·before the start of the following block, when the cursor is positioned at the end of block (after the last word / in front of LF).

© Siemens AG 1990 All Rights Reserved 6ZB5 410-0EP02 2-11

SINUMERIK 810T, GA3 (BN)