Settings (Con’t)

DVD Playback Mode

Some DVD-Audio discs contain DVD-Video as well as DVD-Audio.

To play back the DVD-Video portion of the DVD-Audio disc, set the unit to DVD-Video mode.

GB

Setting the Delay Time

If the speakers cannot be placed at equal distances from the listening position, you can adjust the delay time of the audio signals from the center and rear speakers.

MOVE ENTER RETURN EXIT

MOVE SELECT RETURN EXIT

1 Press the MENU button while the disc tray is open.

2 Press the Cursor ▼ button to move to <Setup> and then press the ENTER button. 3 Press the Cursor ▼ button to move to <DVD TYPE> and then press the ENTER button. 4 Press the Cursor ▲,▼ button to move to <DVD VIDEO> and then press the ENTER button.

Set steps 1 ~ 4 again if you want to switch to DVD AUDIO Play mode.

•DVD VIDEO : set to play the DVD video contents contained on a DVD audio disc.

•DVD AUDIO : set to play the default DVD audio.

•DVD Play mode is set to DVD Audio as factory default setting.

•Powering off the main unit will automatically switch to the DVD Audio mode.

MOVE ENTER RETURN EXIT

MOVE CHANGE RETURN EXIT

1 In Stop mode, press the MENU button.

2 Press the Cursor ▼ button to move to <Audio> and then press the ENTER button. 3 Press the Cursor ▼ button to move to <DELAY TIME> and then press the ENTER button. 4 Press the Cursor ▲,▼,◄,► button to move to the desired speaker and then

press the ENTER button.

5 Press the Cursor ◄,► button to set the Delay time.

You can set the delay time for C between 00 and 05mSEC and for SL and SR between 00 and 15mSEC.

dPress RETURN button to return to the previous level. d Press EXIT button to exit the setup screen.

DivX (R) registration

Please use the Registration code to register this player with the DivX (R) video on demand format. To learn more, go to www.divx.com/vod.

Setting the Speaker Mode

Signal outputs and frequency responses from the speakers will automatically be adjusted according to your speaker configuration and whether certain speakers are used or not.

Setting up the Speaker Delay Time

When 5.1CH Surround Sound is played, you can enjoy the best sound if the distance between you and each speaker

 

is the same.

 

 

Since the sounds arrive at the listening position at different times depending on the placement of speakers, you can

 

adjust this difference by adding a delay effect to the sound of the Center and Surround Speakers.

SETUP

 

 

 

 

 

 

 

 

 

 

 

Setting CENTER SPEAKER

 

 

 

 

 

 

 

 

Ideal CENTER SPEAKER

 

 

 

 

 

 

 

 

placement

If the distance of Dc is equal to or longer than the distance of Df in the

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

figure, set the mode as 0ms. Otherwise, change the setting according

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to the table.

 

MOVE ENTER RETURN EXIT

MOVE SELECT RETURN EXIT

1 In Stop mode, press the MENU button.

2 Press the Cursor ▼ button to move to <Audio> and then press the ENTER button. 3 In the <SPEAKER SETUP>, press the ENTER button again.

4 Press the Cursor ▲,▼,◄,► button to move to the desired speaker and then press the ENTER button.

For C, SL, and SR, each time the button is pressed, the mode switches alternately as follows : SMALL  NONE.

For L and R, the mode is set to SMALL.

•SMALL : Select this when using the speakers.

•NONE : Select this when no speakers are connected.

•Depending on PRO LOGIC and STEREO settings, the speaker mode may vary (see page 53).

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Distance between Df

0.00 m

0.34 m

0.68 m

1.02 m

1.36 m

1.70 m

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

and Dc

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Delay Time

0 ms

1 ms

2 ms

3 ms

4 ms

5 ms

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Ideal

Setting REAR (SURROUND) SPEAKERS

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SURROUND

If the distance of Df is equal to the distance of Ds in the figure,

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

SPEAKER

set the mode as 0ms. Otherwise, change the setting according

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

placement

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

to the table.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

It is desirable to place all speakers within this circle.

 

 

 

 

 

 

 

Distance between Df

0.00 m

1.02 m

2.04 m

3.06 m

4.08 m

5.10 m

Df: The distance from FRONT SPEAKER

and Dc

 

 

 

 

 

 

Dc: The distance from CENTER SPEAKER

 

 

 

 

 

 

 

Delay Time

 

 

 

 

 

 

Ds: The distance from SURROUND SPEAKER

0 ms

3 ms

6 ms

9 ms

12 ms

15 ms

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

•

With

 

 

 

 

 

(Dolby Pro Logic II), the delay time may be different for each mode.

 

 

 

•

With AC-3 and DTS, the delay time can be set between 00 and 15mSEC.

d Press the RETURN button to return to the previous level. d Press the EXIT button to exit the setup screen.

46

• The Center channel is only adjustable on 5.1 channel discs.

47