HANNspree HF205 Error Message & Possible Solutions, User’s Manual, Cable Not Connected, Mode

User’s Manual

ERROR MESSAGE & POSSIBLE SOLUTIONS

CABLE NOT CONNECTED:

1.Check that the signal-cable is properly connected, If the connector is loose, tighten the connector’s screws.

2.Check the signal-cable’s connection pins for damage.

INPUT NOT SUPPORT :

Your computer has been set to unsuitable display mode, set the computer to display mode given in the following table.

FACTORY PRESET TIMING TABLE:

MODE	RESOLUTION	HORIZONTAL	VERTICAL
		FREQUENCY (KHz)	FREQUENCY (Hz)
1	640×350 @70Hz VGA	31.469	70.087
2	640×400 @56Hz VGA	24.827	56.424
3	640×400@70HzVGA	31.469	70.087
4	640×480 @60Hz VGA	31.469	59.94
5	640×480 @67Hz MAC	35	66.667
6	640×480 @70Hz VGA	36.052	70.004
7	640×480 @72Hz VGA	37.861	72.809
8	640×480 @75Hz VGA	37.5	75
9	720×400@70HzVGA	31.469	70.087
10	720x480@60Hz VGA	29.768	59.896
11	720x480@60Hz VGA	31.469	59.94
12	800×600 @56Hz SVGA	35.156	56.25
13	800×600 @60Hz SVGA	37.879	60.317
14	800×600 @72Hz SVGA	48.077	72.188
15	800×600 @75Hz SVGA	46.875	75
16	832×624 @74.6Hz MAC	49.725	74.5
17	1024×768 @60Hz XGA	48.363	60.004
18	1024×768 @66Hz XGA	53.964	66.132
19	1024×768 @70Hz XGA	56.476	70.069
20	1024×768 @75Hz XGA	60.023	75.029
21	1024×768 @75Hz MAC	60.15	74.72
22	1152×864 @75Hz SXGA	67.5	75
23	1152×870 @75Hz MAC	68.681	75.062
24	1152×900 @66Hz SUN66	61.846	66.004
25	1280×720 @60Hz	45	60
26	1280×768 @60Hz	47.776	59.87
27	1280×768 @75Hz	60.289	74.893

22