General Remarks

IV. Area Requirements

Verify the following:

•Floors can support refrigerator’s weight plus approxi- mately 1200 pounds (544 kg) of food weight. Not

all Liebherr products are designed for 1200 pounds (544 kg) of food. Some units are smaller and total weights may vary.

•Finished kitchen floor height is level. Refrigerator must be shimmed to the floor level, or levelled, to make sure, air vents are not obstructed.

•Remove anything attached to the rear or side walls that can obstruct refrigerator opening.

•Cutout dimensions are accurate.

•Electrical outlet is in correct location.

Do not install this unit next to any other refrigerator or freezer except another Liebherr model. Liebherr models are designed to allow side by side installation. They are equipped with a heating system to eliminate condensa- tion when units are installed side by side. Installing this unit next to any other refrigerator or freezer can cause condensation or cause damage to the Liebherr unit.

To protect the refrigerator from possible damage, allow the appliance to stand 1/2 to 1 hour in place before turning the electricity on. This allows the refrigerant and system lubrication to reach equilibrium.

Blocking For Safety

The anti-tip bracket must be installed to prevent the unit from tipping after it is installed. Refer to chapter "Block- ing For Safety" in the installation instructions.

V. Safety Regulations

The appliance complies with UL250 and CAN/CSA-C 22,2 No. 63 and is designed to cool, freeze, store food as well as make ice (if equipped). It is designed as a household appliance. If used commercially, the relevant regulations on commercial use must be observed.

The appliance is set to operate within specific ambient temperature limits according to its climate rating. These temperature limits should not be exceeded. The cor- rect climate rating for your appliance is indicated on the model plate.

This is explained as follows:

Climate

Set for Ambient Temperatures of

Rating

 

 

 

SN

50°F to 90°F (10°C to 32°C)

N

61°F to 90°F (16°C to 32°C)

ST

61°F to 100°F (16°C to 38°C)

T

61°F to 109°F (16°C to 43°C)

SN-ST

50°F to 100°F (10°C to 38°C)

SN-T

50°F to 109°F (10°C to 43°C)

 

 

- The refrigerant circuit has been tested for leaks.

Page 8 Page 10
Page 9
Image 9
Liebherr SBS 32S0, CS 1650, CS 1601 manual IV. Area Requirements, Safety Regulations
Page 8 Page 10

CS 1601, CS 1650, SBS 32S0 specifications

The Liebherr SBS 32S0, CS 1650, and CS 1601 are remarkable innovations in the realm of refrigeration and freezing technology, built to meet a variety of storage needs with efficiency and reliability. Liebherr, a leader in the industry, has engineered these models to provide optimal user experience while ensuring maximum performance.

The Liebherr SBS 32S0 is a side-by-side refrigerator that boasts a spacious interior, providing ample storage for fresh and frozen food. With a total capacity of around 318 liters, it is designed to accommodate large families or those who like to buy in bulk. The appliance features an efficient NoFrost system, which eliminates the need for manual defrosting, enhancing convenience for users. Additionally, its energy efficiency class A++ ensures that users can enjoy significant savings on their electricity bills while also contributing to a more sustainable environment.

The CS 1650 is an advanced wine cooler with a sophisticated design tailored to wine enthusiasts. This model offers an optimal environment for wine storage, maintaining a consistent temperature and humidity level to preserve the integrity and flavor of each bottle. The innovative temperature zones allow for the perfect storage conditions for both red and white wines. Equipped with a UV-protected glass door and activated charcoal filter, it ensures the quality of the wine remains uncompromised by external elements and odors.

The Liebherr CS 1601 is engineered for flexibility and functionality. As a built-in appliance, it seamlessly integrates with kitchen designs, making it an excellent option for modern homes. This model features a multi-zone storage system that allows users to customize their refrigeration experience. With advanced cooling technology and an easy-to-use touch control system, users can effortlessly manage temperature settings.

Each of these models is crafted with durability in mind, utilizing high-quality materials that can withstand daily wear and tear. They come with advanced features such as energy-efficient LED lighting, adjustable shelves, and innovative cooling systems, ensuring that both food preservation and user satisfaction are optimal. Overall, the Liebherr SBS 32S0, CS 1650, and CS 1601 reflect the brand's commitment to excellence, providing reliable refrigeration solutions that cater to a wide array of needs.
Top Page Image Contents