CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
IMPORTANT SAFETY
INSTRUCTIONS
READ BEFORE OPERATING EQUIPMENT
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK)
NO USER-SERVICEABLE PARTS INSIDE
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
The lightning flash with arrowhead symbol within an equilateral triangle is intended to alert the user to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.
The exclamation point within an equilateral triangle is intended to alert the user to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the product.
WARNING
TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY INSERT.
ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPON- DANTE DE LA PRISE ET POUSSER JUSQU’AU FOND.
This product was designed and manufactured to meet strict quality and safety standards.
There are, however, some installation and operation precautions which you should be particularly aware of.
1. | Read these instructions. |
2. | Keep these instructions. |
3. | Heed all warnings. |
4. | Follow all instructions. |
5. | Do not use this apparatus near water. |
6. | Clean only with dry cloth. |
7. | Do not block any ventilation openings. |
| Install in accordance with the manufacture's |
| instructions. |
8. | Do not install near any heat sources such |
| as radiators, heat registers, stoves, or other |
| apparatus (including amplifi ers) that produce |
| heat. |
9. | Do not defeat the safety purpose of the |
| polarized or |
| plug has two blades with one wider than the |
| other. A grounding type plug has two blades |
| and a third grounding prong. The wide blade |
| or the third prong are provided for your safety. |
| If the provided plug does not fit into your |
| outlet, consult an electrician for replacement |
| of the obsolete outlet. |
14.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as
Additional Safety Information!
• | This product should not be placed in a |
| installation such as a bookcase or rack unless |
| proper ventilation is provided or the manufacturer’ |
| s instructions have been adhered to. |
• Apparatus shall not be exposed to dripping | |
| or splashing and that no objects filled with |
| liquids, such as vases, shall be placed on the |
| apparatus. |
• | When the switch is in the OFF position, the |
| apparatus isn’t completely |
| MAINS. |
• The equipment shall be installed near the | |
| power supply so that the power supply is easily |
| accessible. |
• | Do not touch hot spots during and immediately |
| after use. |
• | During and immediately after use, this product |
| is hot in areas other than the controls and rear |
| panel connection jacks. |
• | Do not touch hot spots and especially the top |
NOTE:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
-Reorient or relocate the receiving antenna.
-Increase the separation between the equipment and receiver.
-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
-Consult the dealer or an experienced radio/TV technician for help.
NOTE:
Changes or modifications may cause this unit to fail to comply with Part 15 of the FCC Rules and may void the user's authority to operate the equipment.
10. | Protect the power cord from being walked on |
| or pinched particularly at plugs, convenience |
| receptacles, and the point where they exit |
| from the apparatus. |
11. | Only use attachments/accessories specifi ed |
| by the manufacturer. |
12. | Use only with the cart, stand, tripod, bracket, |
| or table specified by the manufacturer, or |
| sold with the apparatus. When a cart is used, |
| use caution when moving the cart/apparatus |
| combination to avoid injury from |
panel. Contact with hot areas can cause burns. |
• Do not be exposed to excessive heat such as |
sunshine, fi re or the like. |
DECLARATION OF CONFORMITY
This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
U.S. Responsible Party: Marantz America, Inc.
100 Corporate Drive,
Mahwah, NJ, 07430, U.S.A.
TEL:
Type of Product: 8 Channel Power Amplifier
This Class B digital apparatus complies with Canadian | Cet appareil numerique de la Classe B est conforme a |
la norme |
13. Unplug this apparatus during lightning storms |
or when unused for long periods of time. |
Model: MM8003
AMP_080328U2
