ENGLISH
FUNCTION | NAMES AND |
CONNECTIONS | BASIC |
OPERATION
TURNING THE POWER ON
1. Press the POWER ON/STANDBY switch.
2. Sound is output after the standby indicator goes off and the illumination lamp has blinked for about 7 seconds.
The sound output is delayed because of the activation of the muting circuit, which prevents noise from being output until the amplifi er's circuitry operates stably after the power has been turned on.
(The illumination lamp is lit while the amplifi er is operating.)
Note:
Before turning the power on, turn down the volume controls on the connected components.
POWER ON/STANDBY | Standby indicator |
switch |
8CH POWER AMPLIFIER MM8003
OPERATION |
ADVANCED CONNECTIONS |
TROUBLESHOOTING |
OTHERS |
| STANDBY | |
TURNING THE POWER OFF | POWER ON/STANDBY | |
|
| |
1. Press the POWER ON/STANDBY switch. |
| |
2. The illumination lamp goes off, the standby indicator lights, and the amplifier goes into standby mode. |
| |
Note: | Illumination lamp | |
Power is still supplied to some circuits even while the amplifier is in standby mode. | ||
| ||
Disconnect the power cable plug from the power outlet when you leave home for a prolonged period. |
| |
Make sure you can disconnect the plug from the power outlet at any time in order to prevent possible accidents. |
|
8
