Freestanding/Semi Built In Models
CS 1601, CS 1650, SBS 32S0
Cabinet Opening Dimensions - 30" and 60" Models
Electric outlet location
Water supply area.
Do not install the
The appliance can be integrated into the kitchen units. To adapt the appliance to the height of the row of kitchen units, a suitable top cupboard can be fitted above the appliance.
Unit Venting
DO NOT restrict the air flow. An air flow of at least 2" (50mm) must be provided. The opening can either be directly over the appliance or on the back of the cabinet on top of the unit (see ventilation requirements).
The CS models can be installed in standard 24" deep cabinets. You will only have to make sure that the door swing clearance is enough. It is possible to push all CS models to the rear wall of the cabinet without modification.
When installing the appliance next to a wall, a distance on the hinge side of 1 27/64 inches (36 mm) minimum is required be- tween the appliance and the wall to allow for the door handle projection when the door is open.
Minimum Cabinet Opening Dimensions:
CS 1601, 1650
A.
B.
C.85" (2159 mm)
D.
SBS 32S0 (CS 1601 & CS 1650)
A.
B.
C.85" (2159 mm)
D.
*Note:
The given cabinet opening height dimension includes 2" for top air vent.
If you choose to place the vent above the cabinet or in a soffit, you will need to adjust the height dimension accordingly.
5
