![](/images/new-backgrounds/1041751/41751213x1.webp)
Programming Overview
6.4.1Entering & Exiting the Program Menu
To enter Program Mode:
1.Enter the Installer Code (factory programmed default code is 5820).
2.The display prompts you to press the or
key to bring up the Main Menu (see Figure
Figure 6-7 Keypad Enabled Screen
3.Then press 7 . The menu option displays. See Section 7 for detailed menu information and Section 6.5 for a quick reference listing all programmable options and JumpStart defaults.
To exit Program Mode:
When you have completed working with the menus, press (left arrow) several times until you are exited from programming mode. Two prompts will display. The first prompt is to make sure you intended to leave the Program Menu (select Yes or No as appropriate). The second prompt is for accepting all changes. If you select No, any changes you have made since you entered the Program Menu will have no effect.
6.4.1.1 Moving through the Menus
Figure 6-8 shows how to move through Program Menu screens, using the System Options screen as an example.
Figure 6-8 Moving through Program Menu
(System Options Sub-Menu Used as an Example)
151209 |