Honeywell 5820XL manual Computer Account

IntelliKnight 5820XL Installation Manual

7.9Computer Account

An installer at the panel site can initiate communications between the panel and a computer running the 5660 SKSS (see also Section 8.5.16). In order for this communication to function properly both the computer (running the software) and the control panel must have matching computer account numbers and computer access codes.

Before you program in this location you should know how your control panel will communicate with the downloading computer, either through direct connect (RS232) or via the phone lines (Internal Modem).

If the panel initiates the call to a downloading computer, a phone number must be programmed in the computer accounts area. If the computer initiates the call, answering machine bypass may need to be selected (see Section 7.7.2.7).

To program computer account information:

1.Enter the installer code.

2.Press or to display the main menu.

3.Select 7 for Program Menu.

Display reads:	Initializing
	Please wait . . .

4.Select 7 for System Options.

5.Enter the computer account number, then press .

6.Enter the computer code (up to 7-digits), then press .

7.Enter the phone number the panel will dial to connect to a downloading computer (up to

40-digits), then press . See Table 7-7for special dialing characters.

7-46 151209