![](/images/new-backgrounds/1041751/41751285x1.webp)
Programming
14. Repeat Steps 1 through 13 for all points.
7.6.3.1 Assigning a Name to Points
You can assign a name to a point to make it easier to recognize on a display. To edit a point name:
1.Do steps 1 through 4 in Section 7.6.3.
2.Using the or
arrow, select the module of the point you want to edit, press
.
3.Enter the point number.
4.Press until the module name is blinking.
5.Press .
A screen similar to the one shown in Figure
Figure 7-11 Selecting Character for Zone Name
6.Select the characters for the point name by pressing the or
arrow until the desired character is shown then press
.
OR
Enter the Numerical Designator for the character you want, then press . See Appendix B for a list of available characters and their numeric designators.
7.Repeat step 6 until the name is complete.
8.Press when the name is complete.
7.7System Options
This section of the manual explains how to customize software options that affect general operation of the system. This includes such items as: AC loss hours, system clock options, holidays schedule, telephone and reporting account options. Refer to each individual subsection for complete instructions.
151209 |