Honeywell 5820XL Serial/Parallel Interface Module Installation, 17 5824 Connection to the Panel

IntelliKnight 5820XL Installation Manual

4.75824 Serial/Parallel Interface Module Installation

The 5824 serial/parallel interface module allows you to connect a printer to the panel, so you can print a real-time log of system events, a report of detector status, and event history. Instructions for installing the 5824 appear below. The 5824 is for ancillary use only.

5824 installation involves the following steps:

1.Make sure power is off at the panel.

2.Connect the 5824 to the panel as shown in Figure 4-17.

Note: Two 5824s per panel maximum.

3.Use the dipswitches on the back of the 5824 board to assign an ID# to the 5824 (see Sec- tion 4.10.1).

4.Configure the 5824 device through programming. See Section 4.7.1.

5.Connect a printer to the 5824 as shown in Figure 4-18.

Supervised

Power Limited

Figure 4-17 5824 Connection to the Panel

4-18 151209