IntelliKnight 5820XL Installation Manual
7.3.1.2 Setting the 5815XL Wiring Class
8.Choose the class of wiring you wish to use for this module by pressing the 
or 
arrow, then press 
.
7.3.2Adding a Module
If you need to add a new hardware module to the system, follow these steps.
You must be in the Main Menu to perform this task. If necessary, enter the Installer Code.
1.Enter the installer code.
2.Press 
or 
to display the main menu.
3.Select 7 for Program Menu.
Display reads: | Initializing |
| Please wait . . . |
4.Press 1 to enter module menu.
5.Press 2 to add a module.
6.From the next screen, select the number that corresponds to the type of module you are adding from the <New Module Type> screen.
The screen will display “Adding module [#]...” for a few moments. You will be returned to the <New Module Type> screen where you can select another module if desired.
You must save changes when you exit the Program Menu or the new module will not be added.
Note: If you Add a Module that has not been physically connected, the panel will go into trouble after it reinitializes (when you exit the Program Menu). When the new module is attached, the trouble will correct itself automatically the next time you power up the system.
151209 |
