System Installation 4-5
Step 6. Connecting Devices to Standard I/O Ports
Note: There are two 12-inch converter cables shipped with models 320, 32E, and 32H.
These cables are used to connect 25-pin D-shell connectors to serial ports S1
and S2.
Using the customer planning information, Chapter 3 of
7012 300 Series Operator Guide
, or
other information supplied by the customer, connect the cables to the standard I/O ports.
Start at the left connector and move to the right to make cabling easier.
As needed, use the cable labels included in the ship group to label the cables. For additional
information about labeling the cables, see Chapter 10 of

Diagnostic Information For Micro

Channel Bus Systems

.
Power
Tablet
Parallel Port Keyboard
Mouse
Adapter Positions
Serial 1
Serial 2
Models 320, 32E, and 32H:
External Diskette
(optional)
Plate
(not on all models)
11234
Power Ethernet
SCSI Port Tablet
Serial 1 Serial 2 Parallel Port Keyboard
Mouse
Models 340, 34H,350, 355, 360/36T, 365, 370/37T, and
375: Adapter Positions
1234