IBM 7012 manual Replacement

Replacement

Note: If you are replacing the Ethernet riser card, ensure that the jumpers on the new card are set the same as on the old card. Refer to ªSetting the Ethernet Riser Card Jumpersº on page 3-26.

Replace in the reverse order. When replacing the adapter, ensure that the plate of the adapter bracket is under the knurled knob and is in contact with the card guide (for a grounding path) at the top of the adapter bracket.

Note: To avoid having the Ethernet riser card short out against the cover, rock the card toward the front of the machine.

Removal and Replacement Procedures 3-25