Honeywell 5820XL manual Flush Mounting, Annunciator Back Box and Bezel Details

IntelliKnight 5820XL Installation Manual

The 5860 comes from the factory fully assembled. You must disassemble it for mounting. To disassemble the annunciator, use a 5/64 hex wrench to remove the set screws, located on the bottom of the annunciator bezel. (See Figure 4-11for location of the set screws.)

Figure 4-11 Annunciator Back Box and Bezel Details

4.5.1.1 Flush Mounting

This section of the manual describes flush mounting. You can flush-mount with or without an electrical box.

4-12 151209