IntelliKnight 5820XL Installation Manual
7.7.2.2 Number of Answer Rings
This option is used in conjunction with the 5660 SKSS. Use the option to determine the number of rings before the panel answers a call from the computer. Range is
The selection made here must match the programming for this option in the Communication Configuration dialog box of the 5660 SKSS. See the software manual for more information (PN 151240).
8. Enter the desired number of answer rings, then press .
7.7.2.3 Dial Option (TouchTone or Pulse)
9. Press the or arrow to select the dial option, then press .
Dial Option | Description |
|
|
|
|
PULSE | If this option is selected, only pulse dialing will be used for this phone line. |
TTTouchTone dialing. If this option is selected, only TouchTone dialing will be used for this phone line.
| TouchTone alternating with pulse. If this option is selected, the dialer will first attempt to |
TT/PL | use TouchTone. It will switch to pulse if TouchTone is not successful on the first attempt. |
| It will continue to alternate between TT and pulse for additional attempts. |
7.7.2.4 Rotary Format
10.Press the or arrow to select the pulse ratio for rotary dialing option, then press
. Options are:
U | U.S. standard format. Uses the 60 msec / 40 msec make/break ratio. |
EEuropean format. Uses the 66 msec / 34 msec make/break ratio.
7.7.2.5Line Monitor
Enable the line monitor for each phone line that will be used. See Figure
11.Select Y (monitor line) or N (don’t monitor line) by pressing the or arrow, then
press .
7.7.2.6 Ground Start Relay
If using the 5211 ground start relay, you must enable the ground start relay programming option. See Figure
151209 |