Philips 32HFL3330 Connect cables, BB Warning, 4.3Install the remote control batteries, DD Note

ESPAÑOL FRANÇAISE ENGLISH

3.Firmly pull the stand from the bottom of the TV. Place both the stand and bolts in a secure location for future reinstallation.

Step 3 Connect cables

Connect the antenna cable, AC power cord and all other devices to the back of the TV as described in the following sections and in Section 7 Connect devices.

Step 4 Secure the VESA-compatible wall bracket to the TV

BB Warning

Only use the specified bolts (M6 x 10mm) to secure the VESA-compatible wall bracket to your TV. The specified bolts are designed to match the weight of your TV.

DD Note

Depending on your VESA-compatible wall bracket, you may need to separate the mounting plate from the wall bracket for easier installation. Refer to your VESA-compatible wall bracket documentation for instructions.

4.3Install the remote control batteries

	A
A	A
		A
A
	A

1.Open the battery cover on the back of the remote control.

2.Insert the 2 batteries supplied. Make sure the + and - ends of the batteries line up correctly. (inside of case is marked).

3.Close the cover.

4.4Connect the antenna or cable Connect to an antenna

1.Locate the TV ANTENNA connector on the back of the TV.

2.Connect one end of an antenna cable (not supplied) to the TV ANTENNA connectors. Use an adaptor if the antenna cable does not fit.

3.Connect the other end of the antenna cable to your antenna outlet, ensuring that the cable is tightly secured at both ends.

EN-8