6.3Use install menu
This section describe how to set the language and store the channel of the TV.
1.Press MENU on the remote control to display the main menu.
2.Press Î or ï to select Install and press Æ to enter it.
3.Press Î or ï to highlight the item you want to adjust and press Æ to confirm the change.
4.Press MENU to exit.
Main control | Install |
Picture | Language |
Sound | Auto store |
Features | Manual store |
Install | Channel setting |
| Factory reset |
Summary of install settings
•Language - Select a language of your interface.
•Auto store - Automatically sets up the TV for the broadcast or cable channels available in your area.
DD Note
Immediately after unpacking and plugging in your new television, run the auto store function to set up the TV for the broadcast or cable channels available in your area. If you do not run the auto store function to set up the channels, your television may not operate properly.
After you have run auto store, check out the results. Press CH +/- on the remote control and see which channels you can select.
Remember, an antenna or cable TV signal must
| first be connected to your TV. | ENGLISH | |||
• | Manual store - | ||||
| |||||
| • Manual store: Activates auto search channel |
| |||
|
| frequency or press number keys to show your |
| ||
|
| desired channel frequency. |
| ||
| • Prog. no: Use Î or ï to adjust the channel | FRANÇAISE | |||
|
| number in the manual store menu. | |||
| • | Finetune: Manually fine tunes analogue | |||
|
| channels when reception is poor. |
| ||
| • Store: Stores or sets the setting of manual |
| |||
|
| store menu. |
| ||
• | Channel setting - | ESPAÑOL | |||
| • | Channel edit: Sets up a favorite list of your | |||
|
| own with preferred TV channels. |
| ||
| • Channel swap: Exchange the channel. Toggle |
| |||
|
| between From, To, and Exchange. |
| ||
| • Name edit: Assigns or changes a channel |
| |||
|
| name to a channel for which a name has not |
| ||
|
| yet been used. |
| ||
|
| 1. Press Î or ï to edit name and press Æ to |
| ||
|
| move to the next character. |
| ||
|
| 2. Press Í to confirm the first character and |
| ||
|
| press | Æ to confirm the last character. |
| |
|
| 3. Press | Æ to confirm the name. |
|
• Channel sort: Sorts or groups channels.
• Factory reset - Allows you to reset most of the picture and sound settings to their default factory levels. Select No or Yes.
DD Note
If you reset the TV to the factory settings, all your present setting on picture, sound, and other feature settings will be erased and replaced by the manufacture’s default settings. However, your auto lock access code will not be erased.