Audiovox 1525 owner manual Priority Scan Channel Selection Mode, Auto Key Lock Selection Mode

extreme range, the squelch should be set low to allow reception of weak sig- nals. The squelch setting high (HI) or low (Lo) is applied to all channels.

To access the Squelch Level Scan menu,

-Press the Mode Button until the (S HI) or (S Lo) icon flashes on the LCD panel.

-Press the Up or Down Button to toggle the squelch from high to low setting.

-Press the PTT Button to confirm your selection.

Priority Scan Channel Selection Mode

This feature allows you monitor one particular channel while scanning other channels at the same time. If you pre-set any priority channel other than the current channel in use, the pre-set channel will be scanned every 0.5 second and any strong signals on that channel will be played.

To access the Priority Scan menu,

-Press the Mode Button until the (PRIO) icon flashes on the LCD panel.

-Press the Up Button or Down Button to select the desired channel number you wish to monitor. Only channels on the scan list will be available as a priority channel.

-Press the PTT Button for 2 seconds to toggle a channel’s priority status on or off.

NOTE: If PrErr displays when entering the priority channel selection mode, this indicates that no channels have been selected to the scan list. Two or more channels must be selected to the scan list for proper operation of the priority channel feature.

Auto Key Lock Selection Mode

This feature prevents accidental channel change to the preferred settings of the unit. The Auto Key Lock function temporarily disables the Up, Down and Mode Buttons.

To access the Auto Key Lock selection menu,

15