Audiovox 1525 owner manual Operation, Channel Selection

External Microphone/Speaker (6):

This jack accepts an Audiovox headset/microphone for totally hands free operation.

Scan/Lock Mode (13):

Press this Button momentarily to enable or disable the scan. Press and hold Button for more than 1 second to lock or unlock keypad.

Operating Modes and Features

Operation

-Rotate the volume control (15) clockwise to turn power ON. The transceiver will be in normal mode.

-Select the desired channel with the Up (10) and Down (11) Buttons. When receiving a call, the signal strength meter appears to indicate incoming received signal strength and the Receive-Monitor indicator

(17)lights green.

-Push and hold PTT Button (4) to transmit, then speak in to the microphone clearly and slowly. The (red) Transmit indicator (17) lights.

-Release PTT Button (4) to receive.

-Communication can only be accomplished when the channel and CTCSS tone frequency of at least two parties are the same.

-During communication the CTCSS icon will be displayed on the LCD panel if the CTCSS tone frequency function is enabled.

Channel Selection

In order to communicate with other GMRS units, both transmitting and receiving party must be on the same frequency.

The GMRS-1525 has 15 channels (frequencies) (1-15) indicated by the large digits on the LCD display panel. Channels 1 through 7 are the same frequency as FRS channels 1 through 7. Communication with Audiovox

10