Cisco Systems SCE 1000 2xGBE, OL-7821-04 manual SCE 1000#copy running-config startup-config

Chapter 7 Basic SCE 1000 Platform Operations

Managing SCE 1000 Configurations

#Created on 15:50:56 CET MON February 11 2002 #cli-type 1

#version 1

clock timezone CET 1 snmp-server community “public” ro

snmp-server host 10.1.1.253 traps version 1 “public” interface LineCard 0

connection-mode active no silent

no shutdown

flow-aging default-timeout UDP 60 interface FastEthernet 0/0

ip address 10.1.5.109 255.255.0.0 interface FastEthernet 0/1

interface FastEthernet 0/2

exit

line vty 0 4 no timeout exit

SCE 1000#

SCE 1000#copy running-config startup-config

Writing general configuration file to temporary location...

Backing-up general configuration file...

Copy temporary file to final location...

SCE 1000#

For backup purposes, the old startup-config file is saved under the directory: tffs0:system/prevconf. Refer to Recovering a Previous Configuration (on page 7-8) for an explanation on how to recover previous configuration.

To remove a configuration command from the running-config, use the no form of the command.

EXAMPLE:

The following example illustrates how to remove all DNS settings from the running configuration.

SCE 1000(config)#no ip name-server

SCE 1000(config)#

Cisco SCE 1000 2xGBE Installation and Configuration Guide

OL-7821-04 7-7