Cisco Systems OL-7821-04, SCE 1000 2xGBE manual Back Panel

Chapter 2 Introduction to the SCE Platform

Back Panel

LED Groups	Description
Mng	The Mng port LEDs indicate the operational status of the SCE 1000 out-of-band
	LAN-based management port, as follows:
	• Link/Active
	Green — indicates that the port link is up
	Unlit — indicates that the port link is down
	• 10/100/1000
	Green — indicates that the port is set to 100 Mbps
	Unlit — indicates that the port is set to 10 Mbps
	Orange — indicates that the port is set to 1000 Mbps

Back Panel

The SCE 1000 platform back-panel contains the following components:

•Two field-replaceable power supply units with ON/OFF switches

•One field-replaceable fan drawer

•Ground connections

•One connector to the external bypass module

The rear panels of both the AC- and DC-powered SCE 1000 platforms are shown in the following pair of figures.

Figure 2-2: SCE 1000 Back Panel: AC Power

Figure 2-3: SCE 1000 Back Panel DC power

Cisco SCE 1000 2xGBE Installation and Configuration Guide

2-4 OL-7821-04