Chapter 7 Basic SCE 1000 Platform Operations

Starting the SCE 1000 Platform

You are now ready to start your SCE 1000 platform. Proceed to the section Starting the System and Observing Initial Conditions (on page 7-2).

Starting the System and Observing Initial Conditions

After installing your SCE 1000 platform and connecting cables, complete the following steps to start the SCE 1000 platform:

Step 1 Make sure the power cables are connected to the SCE 1000 platform.

Step 2 Plug the AC power supply cables into the AC power source, or make sure the circuit breakers at the DC panels are turned to the on position. Turn both power switches on (⏐).

Step 3 Listen for the fans; you should immediately hear them operating. Step 4 During the boot process, observe the following LEDs:

Both Power LEDs should be green.

Bypass LED should be green while the SCE 1000 is on bypass and unlit when the bypass is turned off.

The Status LED should be a constant orange while booting. After a successful boot, the Status LED is flashing green.

Note It takes a several minutes for the SCE 1000 to boot and for the status LED to change from orange to flashing orange or flashing green.

Step 5 Observe the initialization process. When the system boot is complete, the console screen displays a script and system banner similar to the following:

Cisco Internetwork Operating System Software

IOS (tm) 7300 Software (C7300-JS-M), Version 12.1(9), CISCO RELEASED VERSION Copyright (c) 1986-2001 by Cisco Systems, Inc.

Compiled Tue 17-Jul-01 01:51 by biff

Image text-base:0x40008970, data-base:0x40BF8000

Step 6 When you start up the SCE 1000 platform for the first time, the system automatically enters the setup wizard, which prompts you for configuration information for initial system configuration. On the console terminal, after the system displays the system banner and hardware configuration, you will see the System Configuration Dialog prompt. (Refer to Initial System Configuration (on page 5-3) for a complete description of the setup wizard.)

You have the option of proceeding with the setup wizard to configure the system, or exiting from setup and using configuration commands to configure global (system-wide) and interface-specific parameters. You do not have to configure the interfaces immediately.

If the system does not complete each of the steps in the startup procedure, proceed to Chapter 7, Troubleshooting (on page 8-1) for troubleshooting recommendations and procedures.

Cisco SCE 1000 2xGBE Installation and Configuration Guide

7-2

OL-7821-04

 

 

 

 

Page 98
Image 98
Cisco Systems OL-7821-04, SCE 1000 2xGBE manual Starting the System and Observing Initial Conditions

SCE 1000 2xGBE, OL-7821-04 specifications

Cisco Systems OL-7821-04, SCE 1000 2xGBE is an advanced network service appliance designed to deliver superior performance and reliability for service providers seeking to optimize their networks. This compact yet powerful device is integral in addressing the growing demands of data traffic in telecommunications and data centers.

One of the standout features of the SCE 1000 is its ability to support both IPv4 and IPv6 networks, ensuring compatibility with current and future networking protocols. This dual-stack capability empowers service providers to seamlessly transition and integrate next-generation applications without jeopardizing service quality.

The SCE 1000 is equipped with two Gigabit Ethernet (GbE) ports that enhance its connectivity options and allow for increased bandwidth. This dual-port configuration supports high-speed data transfers and streamlined operations, making it ideal for enterprises with substantial networking demands. Its flexible interface options facilitate easy integration into existing network architectures without requiring extensive reconfiguration.

An essential characteristic of the SCE 1000 is its advanced service creation technology, which allows for dynamic traffic management. This feature intelligently prioritizes and optimizes applications, ensuring that critical services receive the bandwidth they need while maintaining overall network efficiency. Service providers can leverage this capability to implement Quality of Service (QoS) policies, delivering a consistent user experience even during peak usage times.

Furthermore, the SCE 1000 supports various traffic engineering methods, including deep packet inspection and application recognition, enabling operators to monitor and control network traffic effectively. This capability is particularly crucial in identifying and mitigating potential network threats, resulting in enhanced security measures.

With its robust architecture, the device also offers scalability, accommodating the growing network requirements of service providers. As businesses grow and data use expands, the SCE 1000 can adapt without compromising performance.

In summary, the Cisco Systems OL-7821-04, SCE 1000 2xGBE is a versatile network service appliance that combines high performance, advanced service creation technology, and strong security features. It stands out as an essential tool for service providers aiming to enhance their network capabilities and deliver superior services to customers. Its dual GbE ports, IPv4/IPv6 support, and dynamic traffic management make it a reliable choice for organizations anticipating significant data growth.