Chapter 7 Basic SCE 1000 Platform Operations
Starting the SCE 1000 Platform
Final Tests
The procedures for performing the final tests to verify that the SCE 1000 is functioning properly are explained in the following sections:
|
| • Verifying Operational Status (on page | |||
|
| • Viewing the User Log Counters (on page | |||
|
| Verifying Operational Status | |||
|
| After all the ports are connected, verify that the SCE 1000 is not in a Warning state. | |||
|
| To verify that the SCE 1000 is not in a warning state, complete the following steps: | |||
| Step 1 On the SCE 1000 Front panel, examine that the Status LED is flashing green. | ||||
| Step 2 | To display the operation status of the system, at the SCE 1000# prompt, type show system | |||
|
|
| |||
|
| A message displaying the operation status of the system appears. If the system is operating in | |||
|
| order, the following message appears: | |||
|
| System Operation status is Operational. | |||
|
| EXAMPLE: | |||
|
| The following example displays a sample output where the LEDs appear red/orange: | |||
|
| SCE 1000#show system | |||
|
| System Operation status is Operational | |||
|
| Viewing the User Log Counters | |||
|
| View the user log for errors that occurred during the installation process. | |||
|
| To display the user log device counters, complete the following steps: | |||
| Step 1 | At the SCE 1000# prompt, type show logger device | |||
|
| press Enter. | |||
|
| EXAMPLE: | |||
|
| The following example shows the current | |||
|
| SCE 1000#show logger device | |||
|
| Logger device | |||
|
| Total info messages: 1 | |||
|
| Total warning messages: 0 | |||
|
| Total error messages: 0 | |||
|
| Total fatal messages: 0 | |||
|
| If there are “Total error messages” or “Total fatal messages”, use the show logger device | |||
|
| ||||
|
| Cisco SCE 1000 2xGBE Installation and Configuration Guide |
|
|
|
|
|
|
|
|
|
|
|
| |||
|
|
|
|
|
|