Cisco Systems OL-7821-04 manual Organization, Chapter, Title, Description, Overview Introduction

Preface

Organization

Organization

The major sections of this guide are as follows:

Chapter	Title	Description
Chapter 1	Introduction	This chapter provides a brief introduction to Cisco Service
		Control.
Chapter 2	Overview ("Introduction	This chapter provides a hardware overview of the SCE
	to the SCE Platform" on	1000 platform.
	page 2-1)
Chapter 3	Topology (on page 3-1)	This chapter describes the possible deployment topologies
		of the SCE 1000 and explains how various aspects of the
		topology determine the configuration of the system.
Chapter 4	Installation and	This chapter explains how to install a SCE 1000 platform
	Maintenance (on page 4-	in a rack or in a general tabletop installation and how to
	1)	install or replace the power supply units and fan modules.
Chapter 5	Connecting the	This chapter explains how to connect the SCE 1000
	Management Interfaces	platform to a local console and perform the initial system
	and Performing Initial	configuration via the setup wizard that runs automatically.
	System Configuration (on
	page 5-1)
Chapter 6	Cabling the Line Ports	This chapter provides instructions for cabling the Gigabit
	and Completing the	Ethernet ports for one SCE 1000 topologies and for
	Installation (on page 6-1)	configuring Gigabit Ethernet (GBE) interface parameters.
Chapter 7	Basic SCE 1000 Platform	This chapter describes how to start up the SCE 1000
	Operations (on page 7-1)	platform, reboot, and shutdown. It also describes how to
		manage configurations.
Chapter 8	Troubleshooting (on page	This chapter provides basic system startup troubleshooting
	8-1)	information.
Appendix A	The External Optical	This appendix explains how to install the optional external
	Bypass Module (on page	optical bypass module.
	A-1)

Cisco SCE 1000 2xGBE Installation and Configuration Guide

viii OL-7821-04