Chapter 4 Installation and Maintenance

Installing the SCE 1000 Platform

Installation Precautions

The router should already be in the area where you will install it, and your installation location should already be determined. If not, see Site Requirement Guidelines (on page 4-3) and the Site Preparation and Safety Guide.

When installing the SCE 1000, please observe the following conditions:

Allow at least 2 inches (5 cm) of clearance at its left and right sides for airflow clearance from the inlet and exhaust vents, and that no exhaust air from other equipment is drawn into the SCE 1000. For descriptions and illustrations regarding airflow, see Airflow (on page 4-3).

Do not place the SCE 1000 on the floor during installation. Dust that accumulates on the floor is drawn into the interior of the SCE 1000 by the cooling fans. Excessive dust inside the SCE 1000 can cause over-temperature conditions and component failures.

Allow at least 5 inches (12.7 cm) of clearance at the front and rear of the SCE 1000 for installing and rudimentary maintenance for accessing network cables or equipment.

Ensure that the SCE 1000 will receive adequate ventilation. Do not install the SCE 1000 in an enclosed cabinet where ventilation is inadequate!

Provide an adequate chassis Ground (earth) connection for the SCE 1000 (see Attaching a Chassis Ground Connection (on page 4-10) for instructions).

Installing the SCE 1000 on a Workbench or Tabletop

You can install the SCE 1000 platform on any flat surface as long as the surface is large enough for the SCE 1000 (see the table in SCE 1000 Dimensions), and allows for adequate airflow/ventilation around the sides of the SCE 1000, as described in the Installation Precautions (on page 4-5). When installing the SCE 1000 on a workbench or tabletop or in a rack, ensure that the surface is clean and in a safe location.

Figure 4-3: Installing the System on a Flat Surface

To install a SCE 1000 platform on a workbench or tabletop, complete the following steps:

Step 1 Remove any debris and dust from the tabletop or workbench, as well as the surrounding area. Also make sure your path between the SCE 1000 platform and its new location is unobstructed.

Step 2 Place the SCE 1000 platform on the tabletop or workbench.

Cisco SCE 1000 2xGBE Installation and Configuration Guide

 

OL-7821-04

4-5

 

 

 

Page 45
Image 45
Cisco Systems SCE 1000 2xGBE, OL-7821-04 manual Installation Precautions, Installing the SCE 1000 on a Workbench or Tabletop

SCE 1000 2xGBE, OL-7821-04 specifications

Cisco Systems OL-7821-04, SCE 1000 2xGBE is an advanced network service appliance designed to deliver superior performance and reliability for service providers seeking to optimize their networks. This compact yet powerful device is integral in addressing the growing demands of data traffic in telecommunications and data centers.

One of the standout features of the SCE 1000 is its ability to support both IPv4 and IPv6 networks, ensuring compatibility with current and future networking protocols. This dual-stack capability empowers service providers to seamlessly transition and integrate next-generation applications without jeopardizing service quality.

The SCE 1000 is equipped with two Gigabit Ethernet (GbE) ports that enhance its connectivity options and allow for increased bandwidth. This dual-port configuration supports high-speed data transfers and streamlined operations, making it ideal for enterprises with substantial networking demands. Its flexible interface options facilitate easy integration into existing network architectures without requiring extensive reconfiguration.

An essential characteristic of the SCE 1000 is its advanced service creation technology, which allows for dynamic traffic management. This feature intelligently prioritizes and optimizes applications, ensuring that critical services receive the bandwidth they need while maintaining overall network efficiency. Service providers can leverage this capability to implement Quality of Service (QoS) policies, delivering a consistent user experience even during peak usage times.

Furthermore, the SCE 1000 supports various traffic engineering methods, including deep packet inspection and application recognition, enabling operators to monitor and control network traffic effectively. This capability is particularly crucial in identifying and mitigating potential network threats, resulting in enhanced security measures.

With its robust architecture, the device also offers scalability, accommodating the growing network requirements of service providers. As businesses grow and data use expands, the SCE 1000 can adapt without compromising performance.

In summary, the Cisco Systems OL-7821-04, SCE 1000 2xGBE is a versatile network service appliance that combines high performance, advanced service creation technology, and strong security features. It stands out as an essential tool for service providers aiming to enhance their network capabilities and deliver superior services to customers. Its dual GbE ports, IPv4/IPv6 support, and dynamic traffic management make it a reliable choice for organizations anticipating significant data growth.