Power Cord Installation
1.Disconnect power to the PTAC unit.
2.Remove the plastic front cover.
3.Remove the power cord cover. See Figure 1.
Installation
5.Remove the power cord strain relief, and wrap it around the power cord. Reconnect the strain relief to the PTAC unit. See Figure 3.
Figure 1. Power cord cover
4.Install the power cord into the connector on the PTAC unit until the top and bottom tabs engage. See Figure 2.
Tabs
Strain
Relief
Figure 3. | Strain relief |
6.Reinstall the power cord cover. See Figure 4.
Figure 4. Power cord cover
7. Reinstall the plastic front cover on to the PTAC unit.
