Chapter 7 Basic SCE 1000 Platform Operations
Managing SCE 1000 Configurations
Managing SCE 1000 Configurations
The procedures for managing SCE 1000 configurations are explained in the following sections:
•Viewing Configuration (on page 7-4)
•Saving the Configuration Settings (on page 7-6)
•Recovering a Previous Configuration (on page 7-8)
Viewing Configuration
When you enter configuration commands, it immediately effects the SCE 1000 operation and configuration. This configuration, referred to as the
The SCE 1000 provides commands for:
•Viewing the running configuration
•Viewing the startup configuration
After configuring the SCE 1000, you may query for the running configuration using the command show
To view the running configuration, complete the following steps:
At the SCE 1000# prompt, type show
The system shows the running configuration.
SCE 1000#show
#This is a general configuration file
#version 1
|
| clock timezone CET 1 | |
|
| ||
|
| ||
|
| interface LineCard 0 | |
|
| ||
|
| no silent | |
|
| no shutdown | |
|
| ||
|
| interface FastEthernet 0/0 | |
|
| ip address 10.1.5.109 255.255.0.0 | |
|
| interface FastEthernet 0/1 | |
|
| interface FastEthernet 0/2 | |
|
| exit | |
|
| line vty 0 4 | |
|
| no timeout | |
|
| exit | |
|
| SCE 1000# | |
|
| Cisco SCE 1000 2xGBE Installation and Configuration Guide | |
|
| ||
|
|
|
|
|
| ||
|
|
|
|