5-21
User Guide for the Cisco Network Analysis Module (NAM) Traffic Analyzer, 5.0
OL-22617-01
Chapter 5 User and System Administration
User Administration
Adding a NAM User or User Group
To add a NAM user or user group:
Step 1 Click User Setup.
Step 2 Enter the user login name.
Step 3 Click Add/Edit.
Step 4 Enter the user data.
Step 5 Select User Setup.
Step 6 Enter a user password.
Step 7 If necessary, assign a user group.
Step 8 In the TACACS+ settings:
a. Select Shell.
b. Select IOS Command.
c. Select Permit.
d. Select Command.
e. Enter web.
f. In the Arguments field, enter:
permit capture
permit system
permit collection
permit account
permit alarm
permit view
Step 9 In Unlisted Arguments, select Deny.
Configuring a Generic TACACS+ Server
To configure a generic TACACS+ server:
Step 1 Specify the NAM IP address as a Remote Access Server.
Step 2 Configure a secret key for the TACACS+ server to communicate with the NAM.
Note The secret key must be the same as the one configured on the NAM.
Step 3 For each user or group to be allowed access to the NAM, configure the following TACACS+ parameters: